Monthly Archives: March 2017

Hardware, Release

New Paparazzi autopilot Chimera released

The ENAC UAV lab is proud to release its latest autopilot board.  Named Chimera, it is based on the latest STM32F7 micro-controller and offers a large connectivity.

The design have been made with the ease of use and integration for end-users, especially researchers. With the usual features like IMU and barometer, the Chimera also carries a differential pressure sensor, a SD card slot, a XBee modem slot and a 5V power supply dedicated to external companion processor.

Please check the general pinout diagram below or the Wiki page for more details.

The Chimera have been successfully used on the hybrid airframe currently developed by Enac with the help of TUDelft for the control.

Facebooktwittergoogle_plusredditFacebooktwittergoogle_plusreddit
Facebooktwittergoogle_plusrssyoutubeFacebooktwittergoogle_plusrssyoutube
Community, Hardware, Release, Research, Videos

First flights of the hybrid vehicle Cyfoam with Chimera board

1 Comment

The Cyfoam is a hybrid vehicle developed at ENAC Drone Lab. The aircraft is a foam, with a 3D printed fuselage, version of the composite-made Cyclone.

The vehicle is powered by the new autopilot board Chimera! which executes the control algorithms developed by Ewoud from Delft MAV Lab. We are currently aiming at a total autonomous mode, e.g., auto take off and auto landing.

Facebooktwittergoogle_plusredditFacebooktwittergoogle_plusreddit
Facebooktwittergoogle_plusrssyoutubeFacebooktwittergoogle_plusrssyoutube